Ordinary soldering tin can't weld stainless steel because the surface of stainless steel is too smooth.
However, our Stainless Steel Solder Wire can be well used to weld on stainless steel, nickel, copper, iron, nickel plating, chrome plating and other metal surfaces.
It solves the problem that stainless steel and other metal materials do not stick tin.
MAIN FEATURES
[Better Welding Effect]
Stainless steel solder wire, containing special flux which can be easily welded on non stick tin materials. Suitable for soldering on stainless steel, nickel, copper, iron, nickel plating, chrome plating, calvanized and other metal surfaces.
[Widely Used]
This solder wire is suitable for circuit board, stainless steel pot, battery, stainless steel kettle, TV, radio, stereo, laptop, computer, mobile phone, DIY, home improvement, toys and other electrical devices.
[Advantages]
The solder wire offers lower temperature melting, pretty good flow, less smoke, reliable and nice soldering joint. It is easy and fast to be soldered, and reduces the thermal impact of welding on electronic components.
[Efficient Working]
The solder joint is smooth and firm, with good wettability and expansion force to improve your work quality.
[Compatible Soldering Iron]
Compatible with 220V electric soldering iron, portable soldering iron, as well as 15W, 30W, 60W, 150W soldering iron.
Using Method:
- Clean and polish the metal surface to ensure that the welded parts are dry and clean without oil stain and oxidation.
- The soldering iron head shouldbe close to the welding part for a few seconds to preheat, and then the tin should be sent quickly until the welding joint is firm.(Note: The soldering iron should not leave the metal surface, keep heating, weld while hot, and continuously melt tin. The higher the temperature, the better the welding effect.)
- After use, please press the wirehead to avoid flux flow. (Note: The welding temperature starts from 350℃. You can choose knife head or horseshoe shape of soldering iron tip for heat transferring and welding.)
SPECIFICATIONS
Material: Tin Lead
Diameter: 1.0mm
Net Weight: 50g
Flux Content: 2%
Melting Point: 183-266℃
Package Includes: 1x Stainless Steel Solder Wire
NOTE
Due to manual measurements, please allow slight measurement deviations.
Due to the different display and lighting effects, the actual color of the item may be slightly different from the color displayed on the picture.